Items where Subject is "Engineering"

Article

Acar, Mustafa Kemal and Motlagh, Peyman Lahe (2023) A new framework for optimizing energy harvesting from smart composites integrated with piezoelectric patches utilizing lamination parameters. Engineering Solid Mechanics, 12 (2). pp. 141-156. ISSN 22918744

Al Zubi, Mohammad A. and Jayaganthan, A. and Alimuddin, . and Khan, Mohd Yunus and Kumar, Ravi and Singh, Bharat and Kakara, Vighneswara Rao and Pasha, S.K. Khadheer (2022) Reduction of Carbon-Based Emissions using MgO Nanoparticle with Waste Cooking Oil Biodiesel in Diesel Engine. Adsorption Science & Technology, 2022. pp. 1-8. ISSN 0263-6174

Alsheikh, Abdelraouf M. Sami and Rees, D. W. A. (2021) General Stiffness Matrix for a Thin-Walled, Open-Section Beam Structure. World Journal of Mechanics, 11 (11). pp. 205-236. ISSN 2160-049X

Amenya, Rogers Omboga and Sigey, Johanna Kibet and Ole Maloiy, Geoffrey Moriaso and Theuri, David Mwangi (2021) Effect of Head Position Angles on the Blood Flow in the Jugular Vein of Giraffes. World Journal of Mechanics, 11 (08). pp. 165-175. ISSN 2160-049X

Aterezi, Maro Clement and Dahunsi, Bamidele Ibukunolu Olugbemi and Onugba, Michael Attah (2024) Investigation of the Compressive Strength of Sand-Filled Polyethylene Terephthalate Bottles as a Material for Wall Construction. Journal of Engineering Research and Reports, 26 (2). pp. 229-235. ISSN 2582-2926

Cao, Y. and Chen, X. B. (2015) An ARX-Based PID-Sliding Mode Control on Velocity Tracking Control of a Stick-Slip Pi-ezoelectric-Driven Actuator. Modern Mechanical Engineering, 05 (01). pp. 10-19. ISSN 2164-0165

Chen, Xuanlai and Yan, Guochao and Xu, Guang and Yang, Xianglin and Li, Jiajun and Bai, Xuyang and Kyzas, George (2022) Influence of the Branched Structure of Polyoxyethylene Units in Nonionic Surfactants on the Wettability of Anthracite: A Combined Modeling and Experimental Study. Adsorption Science & Technology, 2022. pp. 1-11. ISSN 0263-6174

Choi, Hyun and Lee, Won-Sup and Harisha, Bairi Sri and Kim, Wan-Chin and Lim, Jiseok (2021) Optical Design for Laser Diode Scanner Headlamp with Efficiently Distributed Optical Power for Adaptive Driving Beam System of Automobiles. Applied Sciences, 11 (2). p. 793. ISSN 2076-3417

Denkena, Berend and Eckl, Martin and Brouwer, Dominik (2014) Development of a Multiple Degree of Freedom Knee Disarticulation Prosthesis with Active Leg Length Variation. Modern Mechanical Engineering, 04 (04). pp. 207-221. ISSN 2164-0165

Derbe, Tessema and Temesgen, Shewaye and Bitew, Mamaru and Fedel, Michele (2021) A Short Review on Synthesis, Characterization, and Applications of Zeolites. Advances in Materials Science and Engineering, 2021. pp. 1-17. ISSN 1687-8434

Dodigović, Filip and Ivandić, Krešo and Kovačević, Meho Saša and Soldo, Božo (2021) Error Evaluation and Suitability Assessment of Common Reliability Methods in the Case of Shallow Foundations. Applied Sciences, 11 (2). p. 795. ISSN 2076-3417

Dozie, Kelechukwu C. N. and Ihekuna, Stephen O. (2023) Decomposition with the Additive Model with Exponential Trend Curve and Detection of Seasonal Effect in Descriptive Time Series. Journal of Engineering Research and Reports, 25 (7). pp. 166-175. ISSN 2582-2926

Fu, Weihua and Wang, Cheng and Chen, Jianwei (2021) Operational Modal Analysis for Vibration Control Following Moving Window Locality Preserving Projections for Linear Slow-Time-Varying Structures. Applied Sciences, 11 (2). p. 791. ISSN 2076-3417

Gomez, Frederick Ray I. and Hizon, John Richard E. and Leon, Maria Theresa G. De (2019) Differential Active Balun Design for WiMAX Applications. Journal of Engineering Research and Reports, 4 (4). pp. 1-8. ISSN 2582-2926

Gurusamy, P. and Sathish, T. and Mohanavel, V. and Karthick, Alagar and Ravichandran, M. and Nasif, Omaima and Alfarraj, Saleh and Manikandan, Velu and Prasath, S. and Xu, Jinyang (2021) Finite Element Analysis of Temperature Distribution and Stress Behavior of Squeeze Pressure Composites. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Hadia, N. M. A. and Hajjiah, Ali and Elsayed, Asmaa M. and Mohamed, S. H. and Alruqi, Mansoor and Shaban, Mohamed and Alzahrani, Fatimah Mohammed and Abdelazeez, Ahmed Adel A. and Rabia, Mohamed and Hassan, Hassan M. (2022) Bunch of Grape-Like Shape PANI/Ag2O/Ag Nanocomposite Photocatalyst for Hydrogen Generation from Wastewater. Adsorption Science & Technology, 2022. pp. 1-11. ISSN 0263-6174

Heberl, Michael and Withelm, Christian and Kaul, Anja and Rank, Daniel and Sterner, Michael (2024) Prospective Life Cycle Assessment of Biological Methanation in a Trickle-Bed Pilot Plant and a Potential Scale-Up. Energies, 17 (9). p. 2206. ISSN 1996-1073

Hou, Zhicheng and Zhang, Gong and Yang, Wenlin and Wang, Weijun and Han, Changsoo (2021) Flatness-Based Aggressive Formation Tracking Control of Quadrotors with Finite-Time Estimated Feedforwards. Applied Sciences, 11 (2). p. 792. ISSN 2076-3417

Ibrahim, Ahmed and Ryu, Yeong and Saidpour, Mir (2015) Stress Analysis of Thin-Walled Pressure Vessels. Modern Mechanical Engineering, 05 (01). pp. 1-9. ISSN 2164-0165

Ibrahim, Ali Huddin and Mohd Hasan, Mohd Rosli and Sani, Ashiru and Poovaneshvaran, Sharvin and Wong, Tracy Leh Xin and Megat Johari, Megat Azmi and Choong, Kok Keong and Putra Jaya, Ramadhansyah and Gloria, Antonio (2021) Physicomechanical Assessments and Heavy Metals’ Leaching Potential of Modified Asphalt Binders Incorporating Crumb Rubber and Tin Slag Powders. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Jia, P. and Lai, S. K. and Zhang, W. and Lim, C. W. (2014) Experimental and FEM Modal Analysis of a Deployable-Retractable Wing. Modern Mechanical Engineering, 04 (04). pp. 183-197. ISSN 2164-0165

Keshkar, Miziya and Muthalagu, Raja and Rajak, Abdul and Mathew, Libin K. (2022) GAE and OBE Enhanced Interference Mitigation Techniques in LDACS. Aerospace, 9 (1). p. 45. ISSN 2226-4310

Liaoyuan, Wang and Zhiqiang, Liu and Zhiguang, Li (2024) Robot Design of Underwater Building Surface Dredging - Structural Design. Journal of Engineering Research and Reports, 26 (1). pp. 1-9. ISSN 2582-2926

Lin, Ming-Jong (2024) The Method of the Probability Analysis of Area with Dissolved Gases in Power Transformer Insulating Oil. Journal of Engineering Research and Reports, 26 (5). pp. 155-162. ISSN 2582-2926

Liu, Yongjie and Jiang, Yu and Li, Hengnian and Zhang, Hui (2021) Some Special Types of Orbits around Jupiter. Aerospace, 8 (7). p. 183. ISSN 2226-4310

Lombarkia, Redouane and Gakwaya, Augustin and Nandlall, Denis and Dano, Marie-Laure and Lévesque, Julie and BenKhelifa, Ameur and Vachon-Joannette, Philippe and Gagnon, Philippe (2021) Comparative Study of Energy Absorption Capability of Flat Plate Coupons Made by CFRP Plain Weave Fabric Composites. World Journal of Mechanics, 11 (07). pp. 121-145. ISSN 2160-049X

Lucien, Bognini Y. and Byiringiro, Jean B. and Zouma, Bernard and Abraham, Bognini W. (2022) Optimization of PV/Diesel Production through Data Monitoring. Energy and Power Engineering, 14 (09). pp. 477-490. ISSN 1949-243X

M., Itaa C. and E., Ugwoha and B., Yorkor (2023) Statistical Analysis of Traffic Noise Status at Selected Junctions in Port Harcourt Metropolis. Journal of Engineering Research and Reports, 25 (10). pp. 167-175. ISSN 2582-2926

Ma, Lihuan and Sun, Zhuo and Gao, Yuan (2023) Complete Coverage Path Planning Based on Improved Area Division. World Journal of Engineering and Technology, 11 (04). pp. 965-975. ISSN 2331-4222

Ma, Shouye and Rangabhashiyam, S (2022) Selection of Characteristic Particle Size of Drilling Cuttings Based on Adsorption-Desorption Properties: Experiment and Simulation. Adsorption Science & Technology, 2022. pp. 1-19. ISSN 0263-6174

Maas, Oliver (2023) Large-eddy simulation of a 15 GW wind farm: Flow effects, energy budgets and comparison with wake models. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Matome, Karabo Samuel and Ketlogetswe, Clever and Mmopelwa, Gagoitseope (2022) A Comprehensive Economic Assessment of Producing Biodiesel Derived from Used Cooking Oil Using the BioPro380 EX. Energy and Power Engineering, 14 (09). pp. 491-508. ISSN 1949-243X

Natrayan, L. and Gaur, Piyush and Merneedi, Anjibabu and Kaliappan, S. and Patil, Pravin P. and Sivaprakash, V. and Chewaka, Muse Degefe and Pasha, S.K. Khadheer (2022) Investigation of Tribological Behaviour on DLC Coatings for AA5051 using DC Sputtering. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Ngoc, Khanh Huyen Pham and Vu, Anh-Tuan and Vosoughi, Mehdi (2022) Simple Preparation of the CuO•Fe3O4/Silica Composite from Rice Husk for Enhancing Fenton-Like Catalytic Degradation of Tartrazine in a Wide pH Range. Adsorption Science & Technology, 2022. pp. 1-16. ISSN 0263-6174

Nordvall, Erik and Wiberg, Anton and Tarkian, Mehdi (2023) Knowledge-based engineering and computer vision for configuration-based substation design. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Norrefeldt, Victor and Riedl, Gerhard (2021) Investigation of the Impact of a Particle Foam Insulation on Airflow, Temperature Distribution, Pressure Profile and Frost Buildup on the Aircraft Structure. Aerospace, 8 (12). p. 359. ISSN 2226-4310

Okoro, Andikan E. and Ubom, Emmanuel A. and Ukommi, Ubong S. (2024) Evaluation of Machine Learning Model for Network Anomaly Detection: Support Vector Machine. Journal of Engineering Research and Reports, 26 (8). pp. 326-342. ISSN 2582-2926

Omonefe, Francis and Desmond, Eteh and Ebiegberi, Oborie and Karo, Oboshenure Kingsley (2019) Analysis of Near Surface Seismic Refraction for Geotechnical Parameters in Opolo, Yenagoa of Bayelsa State. Journal of Engineering Research and Reports, 4 (4). pp. 1-12. ISSN 2582-2926

Pany, Chitaranjan and Li, Guoqiang (2023) Editorial: Application of periodic structure theory with finite element approach. Frontiers in Mechanical Engineering, 9. ISSN 2297-3079

Park, Chaehyeong and Song, Myoungki and Park, Gyutae and Kim, Kyunghoon and Lee, Taehyoung and Lee, Sanguk and Lee, Jongtae and Bae, Min-Suk (2021) Real-World Vehicle Emission Rate of Particle Size Distributions Based on Measurement of Tunnel Flow Coefficient. Applied Sciences, 11 (2). p. 794. ISSN 2076-3417

Robison, Zachary and Gross, Andreas (2021) Large-Eddy Simulation of Low-Pressure Turbine Cascade with Unsteady Wakes. Aerospace, 8 (7). p. 184. ISSN 2226-4310

Safarzadeh, Hamid and Niaki, Seyed Taghi Akhavan (2023) Unrelated parallel machine scheduling with machine processing cost. International Journal of Industrial Engineering Computations, 14 (1). pp. 33-48. ISSN 19232926

Sall, Mamadou and Sow, Ousmane and Gueye, Sega and Diop, Gora and Habiboullah, Lemrabott and Wade, Mamadou and Sissoko, Gregoire (2022) Solar Controller with Automatic Search Technology for the Maximum Power Point with Autonomy Display. Energy and Power Engineering, 14 (09). pp. 509-522. ISSN 1949-243X

Samuel, Aneke Chikezie and Micheal, Asuquo Philip and Simeon, Ozuomba (2023) Design and Implementation of a Microcontroller-based Weather Acquisition Device. Journal of Engineering Research and Reports, 24 (6). pp. 35-46. ISSN 2582-2926

Savadogo, Mahamadi and Ouedraogo, Adama and Soro, Boubacar and Koudougou, Zi Daouda and Zoungrana, Martial and Zerbo, Issa (2022) Analysis and Comparison of Doping Level Effects on a Crystalline Silicon PV Cell under Both Moderate Light Concentration and Normal Illumination Modes. Energy and Power Engineering, 14 (10). pp. 523-540. ISSN 1949-243X

Schmitt, Christian and Kremeur, Arnaud and Lipinski, Pawel and Capelle, Julien (2024) Numerical Optimization by Finite Element Method of Stainless Steel/Glass-Epoxy Composite Bolted Joint under Tension and Compression. Engineering, 16 (04). pp. 102-122. ISSN 1947-3931

Sedara, A. M. (2019) Development of a Single Wheel Test Rig for Measuring Motion Resistance. Journal of Engineering Research and Reports, 4 (4). pp. 1-13. ISSN 2582-2926

Sedara, A. M. (2019) A Review of Soil Dynamics in Traction Studies. Journal of Engineering Research and Reports, 4 (4). pp. 1-13. ISSN 2582-2926

Shimada, Kunio and Ikeda, Ryo and Kikura, Hiroshige and Takahashi, Hideharu (2021) Development of Novel Magnetic Responsive Intelligent Fluid, Hybrid Fluid (HF), for Production of Soft and Tactile Rubber. World Journal of Mechanics, 11 (10). pp. 187-203. ISSN 2160-049X

Shivani, Y. N. and Srinivas, A. and Thanmayi, B. K. and Vignesh, V. and Srividya, B. V. (2019) EdDSA Over Galois Field GF(p^m) for Multimedia Data. Journal of Engineering Research and Reports, 4 (4). pp. 1-7. ISSN 2582-2926

Siva Subramanian, S. and Saravanakumar, R. and Ganthia, Bibhu Prasad and Kaliappan, S. and Beyan, Surafel Mustefa and Mallick, Maitri and Mohanty, Monalisa and Pavithra, G. and Chelladurai, Samson Jerold Samuel (2021) A Comprehensive Examination of Bandgap Semiconductor Switches. Advances in Materials Science and Engineering, 2021. pp. 1-8. ISSN 1687-8434

Srikacha, Nikom and Sriuttha, Manop and Neeratanaphan, Lamyai and Saiyasombat, Chatree and Tengjaroensakul, Bundit and Ponnusamy, Senthil Kumar (2022) The Improvement of Natural Thai Bentonite Modified with Cationic Surfactants on Hexavalent Chromium Adsorption from an Aqueous Solution. Adsorption Science & Technology, 2022. pp. 1-15. ISSN 0263-6174

Su, Kai (2023) Review on the Role of Rubber on the Performance of Concrete. Journal of Engineering Research and Reports, 25 (10). pp. 12-18. ISSN 2582-2926

Tung, Nguyen Thanh and Van, Luong Van (2022) A study on the vibration of a bus with air suspension system moving on random road surface profiles with different speeds. Engineering Solid Mechanics, 11 (2). pp. 119-124. ISSN 22918744

Usubamatov, Ryspek (2021) Interrelation of Precessed Motions of the Gyroscope. World Journal of Mechanics, 11 (09). pp. 177-185. ISSN 2160-049X

Vasilya, Sinitsyna and Anton, Sinitsyn (2014) Finite-Element Analysis of Parts Stress State of Tight Joint Assembled by Press Fitting. Modern Mechanical Engineering, 04 (04). pp. 198-206. ISSN 2164-0165

Wang, Lixin and Yang, Kun and Zhao, Peng and Yue, Ting (2021) Aircraft Configuration Parameter Boundaries Based on Closed-Loop Flying Qualities Requirements. Aerospace, 8 (12). p. 360. ISSN 2226-4310

Xia, Donghong and Shi, Leilei (2023) Finite Element Analysis of Steel Truss Bridge Structure Based on ANSYS. Journal of Engineering Research and Reports, 25 (9). pp. 155-165. ISSN 2582-2926

Xing, Wang and Haitao, Xu and Kuo, Lu (2023) Mathematical Model and Simulation Based on ANSYS Maxwell of the Magnetic Fluid Differential Transformer Inclination Sensor. Journal of Engineering Research and Reports, 24 (3). pp. 1-9. ISSN 2582-2926

Yadav, Virendra Kumar and Choudhary, Nisha and Ali, Daoud and Kumar, Gokhlesh and Gnanamoorthy, G. and Khan, Azhar Ulla and Kumar, Pankaj and Hari Kumar, S. and Tizazu, Belachew Zegale and R, Lakshmipathy (2022) Determination of Adsorption of Methylene Blue Dye by Incense Stick Ash Waste and Its Toxicity on RTG-2 Cells. Adsorption Science & Technology, 2022. pp. 1-10. ISSN 0263-6174

Yang, Ruiheng (2022) Review of Photovoltaic Cell Technology Development. Energy and Power Engineering, 14 (10). pp. 541-549. ISSN 1949-243X

Zaman, Fahad A. and Townsend, Lawrence W. and de Wet, Wouter C. and Burahmah, Naser T. (2021) The Lunar Radiation Environment: Comparisons between PHITS, HETC-HEDS, and the CRaTER Instrument. Aerospace, 8 (7). p. 182. ISSN 2226-4310

Zhang, Daming and Sun, Fangjin and Liu, Tiantian and Tang, Shengwen (2021) Prediction of Compressive Strength of Geopolymer Concrete Based on Support Vector Machine and Modified Cuckoo Algorithm. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Zhao, Shilei and Chen, Wanchun and Yang, Liang (2021) Optimal Guidance Law with Impact-Angle Constraint and Acceleration Limit for Exo-Atmospheric Interception. Aerospace, 8 (12). p. 358. ISSN 2226-4310

Zhou, Shenghan and Wei, Chaofan and Li, Pan and Liu, Anying and Chang, Wenbing and Xiao, Yiyong (2021) A Text-Driven Aircraft Fault Diagnosis Model Based on Word2vec and Stacking Ensemble Learning. Aerospace, 8 (12). p. 357. ISSN 2226-4310

Book Section

Abeida, Habti (2021) Approximate Maximum-likelihood DOA Estimation for a Single Narrow-band Amplitude-distorted Wavefront. In: New Approaches in Engineering Research Vol. 12. B P International, pp. 133-155. ISBN 978-93-91882-06-8

Adewuyi, Adekunle P. (2023) Influence of Agro-Industrial Leachate Polluted Soil on the Compressive and Flexural Properties of Unstressed Concrete Substructure. In: Research and Developments in Engineering Research Vol. 9. B P International, pp. 1-17. ISBN 978-81-19761-91-3

Andrade, Sânia M. B. de and Ladchumananandasivam, Rasiah and Rocha, Brismak G. da and Belarmino, Débora D. and Galvão, Alcione O. (2020) Recent Studies on the Use of Exoskeletons of Shrimp (Litopenaeus vanammei) and Crab (Ucides cordatus) for the Extraction of Chitosan and Production of Nanomembrane. In: Emerging Trends in Engineering Research and Technology Vol. 10. B P International, pp. 125-141. ISBN 978-93-90206-84-1

Armand, Zogo Tsala Simon and Merlin, Ayissi Zacharie and Anicet, Noah Pierre Marcel and Fabien, Betene Ebanda and Max, Ayina Ohandja Louis (2021) Categorization of Road Accidents Related to the Default of Signaling: A Case Study of the Yaoundé-Douala Highway, Southern Cameroon. In: New Approaches in Engineering Research Vol. 12. B P International, pp. 156-179. ISBN 978-93-91882-06-8

Bertin, Nkibeu Jean and Nyobe, Charly Julien and Sali, Moussa and Jerémie, Madja Doumbaye (2023) Determination of the Vibratory Damping Ratio: A Methodological Review. In: Research and Developments in Engineering Research Vol. 9. B P International, pp. 33-48. ISBN 978-81-19761-91-3

Charan, G. Sree Bhavani and Rao, G. Naga Malleswara (2021) Vibrational and Finite Element Analyses of T-Section Cantilever Beam Using ANSYS and MATLAB: A Recent Study. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 1-8. ISBN 978-93-91595-42-5

Cortez, Celia Martins and Coura, Carla Patrícia de Morais E. and Paulino, Erica Tex and Fragoso, Viviane Muniz da Silva and Silva, Dilson (2021) Characteristics of Haloperidol Interacting with Serum Albumins: A Study Using Computational Model. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 25-31. ISBN 978-93-91215-95-8

Desai, Mittal and Patel, Atul (2021) Novel and Efficient Hybrid Model for Classification of Heart Disease. In: Current Approaches in Science and Technology Research Vol. 9. B P International, pp. 20-28. ISBN 978-93-91312-62-6

Dinesha, L. and Pradeep, B. S. and Sharma, Sukhwinder (2023) Fine Grained Access Control on Information Retrieval. In: Research and Developments in Engineering Research Vol. 1. B P International, pp. 23-40. ISBN 978-81-19102-73-0

Elizalde, Rubén Rodríguez (2023) Constructive and Historical Analysis of the Tower of Hercules: Ancient Roman Lighthouse Still in Use. In: Research and Developments in Engineering Research Vol. 9. B P International, pp. 81-108. ISBN 978-81-19761-91-3

Ghatak, Manjula Das and Mahanta, P. (2021) Kinetic Study and Model Development for Cumulative Biogas Production from Cattle Dung. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 32-40. ISBN 978-93-91215-95-8

Guru, Ramratan and Grewal, Deepika and Kumar, Anupam (2023) To Study the Creative Technique on Ikat Traditional Textile. In: Techniques and Innovation in Engineering Research Vol. 5. B P International, pp. 172-184. ISBN 978-81-19102-05-1

Habeeb, Salih Abbas and Birtio, Nardin Adnan and Kadhim, Hanaa Jawad (2021) The Influence of Bio Natural Dye on the Optical Properties of Liquid Polyvinyl Alcohol. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 41-47. ISBN 978-93-91215-95-8

Hellal, Abdelhafid and Souli, Aissa and Bashour, Rami and Kharaz, Ahmad (2023) Study of the Impact of Loads on Power Flow in Power Systems Using Powerapps and Etap. In: Research and Developments in Engineering Research Vol. 9. B P International, pp. 18-32. ISBN 978-81-19761-91-3

Hora, M. S. (2023) Investigating the Structural Behaviour of RC Ribbed Skew Slab by Changing Skew Angle in Feasible Range. In: Research and Developments in Engineering Research Vol. 2. B P International (a part of SCIENCEDOMAIN International), pp. 172-186. ISBN 978-81-19217-30-4

Jadhav, Anita B. and Rao, Y. Srinivasa (2020) Bandwidth Distribution Algorithm of Applications in LTE-Femtocell Network: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 44-59. ISBN 978-93-90149-08-7

Karthik, Durga and Vijayarekha, K. (2020) Identifying Efficient Road Safety Prediction Model Using Data Mining Classifiers: Recent Advancements. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 60-65. ISBN 978-93-90149-08-7

Kulkarni, M. B. and Mahanwar, P. A. (2020) Investigating the Effect of Methyl Methacrylate– Acrylonitrile -Butadiene–Styrene (MABS) on the Mechanical and Thermal Properties of Poly (Methyl Methacrylate) (PMMA)-Fly Ash Cenospheres (FAC) Filled Composites. In: Emerging Trends in Engineering Research and Technology Vol. 10. B P International, pp. 112-124. ISBN 978-93-90206-84-1

Kumar, P. Ashok and Kumar, Ch. R. Phani (2020) Simplified Measurement on the Impact of Radiation by Mobiles: Recent Study. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 36-43. ISBN 978-93-90149-08-7

Lasisi, Lawal S. and Chris, Chatwin R. (2021) Recent Study on the Criticality of Space Based Oscillators for the Optimal Performance of Time-Based Signals. In: Advanced Aspects of Engineering Research Vol. 16. B P International, pp. 186-212. ISBN 978-93-91215-97-2

Majeed, C. T. Abdul and Ilankumaran, M. (2020) The Effect of Acquiring Second Language Skills through Programmed Instruction: A Study. In: Emerging Trends in Engineering Research and Technology Vol. 10. B P International, pp. 103-111. ISBN 978-93-90206-84-1

Malik, Abhay and Daketi, Srinivas and Dorcas, Veronica (2023) Occupational Influence on Rural Built Form of Andhra Pradesh, India through Correlation Statistical Test. In: Research and Developments in Engineering Research Vol. 2. B P International, pp. 150-171. ISBN 978-81-19217-30-4

Monteiro, Paulo Roberto Duailibe and Borges, Thiago Trezza and Schiochet, Andre Fernando (2023) Design Analysis of Electrical System Onshore Wind Farms Using Genetic Algorithm: A Case Study. In: Research and Developments in Engineering Research Vol. 1. B P International, pp. 1-22. ISBN 978-81-19102-73-0

Pal, Bishwajit and Khaiyum, Samitha (2020) Autonomous Planetary Vehicle Development Platform: New Perspectives. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 13-35. ISBN 978-93-90149-08-7

Paul, P. Jeno and Arun, K. A. and Priyadarsini, R. and Sredevi, M. (2021) Authorization in HSV-DWT-DCT - for Depth-Image-Based Rendering 3D Images: An Advance Study. In: Advanced Aspects of Engineering Research Vol. 16. B P International, pp. 213-223. ISBN 978-93-91215-97-2

Singh, Bhanu P. (2021) Studies of Optical and Phonon Properties of Wurtzite Gallium Nitride: First-principle Calculations. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 17-24. ISBN 978-93-91215-95-8

Stoilova, Krasimira and Stoilov, Todor (2021) Solving Transportation and Travelling Salesman Problems in Excel Environment. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 48-62. ISBN 978-93-91215-95-8

Tabra, Yasmine M. and Sabbar, Bayan Mahdi (2021) Determination of FPGA Implementation of New LM-SPIHT Colored Image Compression with Reduced Complexity and Low Memory Requirement Compatible for 5G. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 9-21. ISBN 978-93-91595-42-5

Varghese, Joseph P. and Sundaramoorthy, Kumaravel and Sankaran, Ashok (2023) Optimization and Validation of Distributed Generation Integrated Load Flow Scheme for Congestion Management of Interconnected Transmission Systems. In: Research and Developments in Engineering Research Vol. 9. B P International, pp. 49-80. ISBN 978-81-19761-91-3

Venkatesha, K. and Vidya, H. A. (2020) Practical Realization of Three Phase Buck AC Converter Feeding Three Phase Star Connected RL Load Using FPGA Real Time Controller: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 1-12. ISBN 978-93-90149-08-7